£43.80 inc. VAT
Out of stock
1.75L 2K Satin Finish Clear Acid Etch Lacquer Kit for Bare Surfaces Aluminium Copper Brass Steel inc. Activator & Thinner
Kit includes;
1 Litre Satin Etch Lacquer
500ML 2K Etch Lacquer Activator
250ML 2K Thinner
For Bare Steel Aluminium Copper Brass Etc. Can be used to lacquer polished / bare / skimmed alloy wheels. No primer required.
Genuine 2K Isocyanate Ultra clear satin lacquer that is resistant to oil & fuel
• Oil & petrol resistant.
• Extremely fast Drying
• Superb flow characteristics & Weather Resistant.
• Tough anti-scratch coating.
• Can be machine polished after 24 hours.
• Correct breathing equipment must be used with this product.
This is achieved by combining an acid with the paint so that the acid microscopically etches the surface of the substrate, thus forming a physical and chemical bond between the two.
To achieve the best results always prepare the surface before painting. Make sure surfaces to be painted are clean, dry and free from rust, loose debris, grease, dust and silicon/wax. The use of a primer is recommended where applicable. Use in a well-ventilated area.
To avoid overspray, protect surrounding area with masking tape and masking film or paper.
Always use the can at room temperature (21ºC approx.) and shake the can well for at least 2 minutes before use.
Spray in dry, windless conditions. Avoid spraying on excessively wet, cold or damp days. Test the spray on a small inconspicuous area first.
For best results apply several lighter coats, allowing 10-15 minutes between each coat.
CONTAINS: Acetone, isocyanates, xylene (mixture of isomers)
DANGER: Causes serious eye irritation. Causes skin irritation. Harmful to aquatic life with long lasting effects.
READ LABEL BEFORE USE: If medical advice is needed: Have product container or label at hand. Do not spray on an open flame or other ignition source. Avoid breathing vapour or spray. wear protective gloves and eye protection; gloves; neoprene. Safety glasses with side shields. Avoid release to the environment.
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water if eye irritation persists: Get medical attention. Dispose of contents and container in accordance with all local, regional, national and international regulations.
USE SUITABLE MASK TO USE THIS PRODUCT
