£10.74 – £78.00 inc. VAT
White 1K Acid Etch Primer Ready To Use Bare Metal Primer
Fast drying easy to apply acid etch primer for use on most surfaces.
Can be overcoated with most paint types. This versatile acid etch primer can be used to prime:
• Aluminum
• Steel
• Bare metal
• Brass
• Copper
• Fiberglass
• Most plastics
• Galvanized
Available in 5 different sizes and 4 colours.
This is achieved by combining an acid with the paint so that the acid microscopically etches the surface of the substrate, thus forming a physical and chemical bond between the two.
1. To achieve the best results always prepare the surface before painting. Make sure surfaces to be painted are clean, dry and free from rust, loose debris, grease, dust and silicon/wax. The use of a primer is recommended where applicable.
2. Use in a well-ventilated area.
3. To avoid overspray, protect surrounding area with masking tape and masking film or paper.
4. Always use the can at room temperature (21ºC approx.) and shake the can well for at least 2 minutes before use.
5. Spray in dry, windless conditions. Avoid spraying on excessively wet, cold or damp days. Test the spray on a small inconspicuous area first.
6. Hold can upright, approximately 15-25cm from the surface to be sprayed. Depress nozzle and spray with gentle back and forth motion. If the paint runs, increase the spray distance. If the paint appears dry and powdery, hold the can closer to the surface.
7. For best results apply several lighter coats, allowing 10-15 minutes between each coat. Shake can before use and in-between coats.
8. After use, turn the can upside down and spray briefly to clear nozzle of paint. If spray nozzle becomes blocked, remove it and soak in thinners.
CONTAINS:Â Acetone; xylene (mixture of isomers)
DANGER:Â Extremely flammable aerosol. Causes serious eye irritation. Causes skin irritation. Harmful to aquatic life with long lasting effects.
READ LABEL BEFORE USE:Â If medical advice is needed: Have product container or label at hand. Do not spray on an open flame or other ignition source. Avoid breathing vapour or spray. wear protective gloves and eye protection; gloves; neoprene. Safety glasses with side shields. Avoid release to the environment.
IF ON SKIN:Â Wash with plenty of soap and water.
IF IN EYES:Â Rinse cautiously with water if eye irritation persists: Get medical attention. Dispose of contents and container in accordance with all local, regional, national and international regulations.